Phone : 405-206-9010

Metal Detectors & Accessories from BigBoysHobbies   
Login / Register   

The New XP Deus version 4.1 Software Update is here!

You can view the complete setup and instalation instructions on how to update your headphones, remote control and coil software over at the XP deus website, it's important to make sure all of your devices are fully charged before beginning the update!

Here's a quick overview of the changelog:

The Radio connection between MI-6 and DEUS is now more reliable and faster.

New EXPERT Mode : GROUND SENSITIVITY

New menu addition "Ground Sensitivity" in GB > EXPERT. This new setting makes it possible to adjust the machines ability to track soils according to their intensity. This makes it possible to avoid tracking on soils with a low mineralisation.

• GROUND SENS low (1 to 5): Slightly mineralized soils are ignored and the DEUS does not track and will not display ground values, the Deus will default to the recommended level.

• GROUND SENS high (6 to 10): The DEUS will track even low mineralized soils.

New EXPERT Mode : GROUND SENSITIVITY

GROUND EFFECT
Do not be tempted to adjust the "GROUND SENS" too high as this may introduce more instability and false ground readings. Levels of 1 to 5 are recommended, they will give you better stability over
the V4.0

GROUND EFFECT

• Ground measurement display: If the DEUS does not register a ground effect for 7 seconds or receives a level lower than the set "GROUND SENS" for more than 7 seconds it will now display

• Ground Tracking: If the DEUS no longer measures a suitable ground fefect for 30 seconds it will default the tracking to a setting value of 88 for more stability For example the ground value will revert to default if: The soil is not mineralized enough or if the level of mineralization is lower than your set "GROUND SENS", or simply if you stop detecting.

As soon as you resume detecting or if the soil becomes suciently mineralized again, the DEUS will continue to track the soil and the display will show the measured value. HF coils do not require software updates for the moment, they are ignored during the update