Phone : 405-206-9010

Metal Detectors & Accessories from BigBoysHobbies   
Login / Register   

Metal Detecting Blog

  • XP Deus V5 update and New XP Deus X35 coils!

    Over the years, the XP DEUS has continued to evolve, especially with the FREE software updates allowing the user to benefit from our advancing technology without the need to buy a new machine.

    XP have been regularly introducing new accessories, such as the MI-6 pin pointer which connects directly to the DEUS, let’s not forget the super light and incredibly stable new HF coils which have taken the Deus to a new level.

    This month XP are pleased to announce the upcoming release of 3 new search coils for the DEUS accompanied by a new FREE version 5 update which will also be available soon.


    The X35 search coils:
    Designed around brand new electronic advances, these new high performance and versatile coils will allow you to choose from a wide range of frequencies ranging from 3.7kHz to 27.7kHz. In total there are 35 available frequencies, based around 5 main frequencies that are quickly accessible.


    A new Boost mode is now an option on frequencies 3.7Khz to 4.4 kHz and can significantly increase detection depth on highly conductive targets, such as large masses and large Silver coins. For added performance on such targets we recommend the larger coils such as the 34/28 cm (13” x11”) or the 28cm (11”) round coil. These new coils will be available as options at the same prices as the previous coils from the end of July 2018, and they will be supplied as standard with the DEUS from September 2018.

    X35 coil main characteristics: écran deus v5v4

    Total of 35 frequencies – 5 main frequencies with 7 wide offsets 3.7 to 4.4kHz, 7.1 to 8.4kHz, 10.5 to 12.4kHz, 15.2 to 17.8kHz, 23.5 to 27.7kHz
    Selectable frequency offset without loss of performance.
    TX power adjustment is available on all frequencies and offsets
    Special Low frequency TX Boost feature:
    Normal or Boost option – The transmitted power has 2 selectable levels when using frequencies 3.7Khz to 4.4kHz.
    The BOOST mode significantly increases the transmission power of the transmitting coil, allowing greater detection levels if the soil conditions allow.
    TX boost is a special mode, the battery life of the coil may be reduced down to 6 hours.
    The overall battery life of the x35 coil has improved on most frequencies by +10% to +40%
    High frequencies 23- 27.7kHz – Excellent sensitivity to low conductive targets and small targets.
    Better overall stability
    The X35 coils are available in 22cm (9”), 28cm (11”) and 34 / 28cm (13” x11”) and will work with the DEUS in version 5.


    The new update allows you to accept and use the X35 coils and all their features listed above without the need to buy a completely new detector! Also the version 5 update includes some new features to the WS4 and WS5 wireless headphones, now they have become even more versatile!


    WS4 / WS5 new features:
    TX Power
    Automatic Ground Tracking
    Frequency offset (35 frequencies with the new X35)
    Iron volume
    Audio Response

  • Be Careful, Fake AT Pro Pointers are hitting the market

    We're seeing various reports of fake Garrett AT Pro pointers circulating, mostly from eBay. The fakes seem to be using an almost identical hard shell (though slightly different shade of orange) with good looking box, case and paperwork but the cap and internals are very cheap. These fakes are unreliable and not protected by any warranty. We always advise against purchasing from international sellers, especially via eBay. If you are looking to buy a Garrett AT Pro pointer, please purchase directly from an authorized Garrett Dealer. It's really important to note, the fakes are NOT waterproof as you can see in the pictures.

    The images are from the Garrett AT Pro Users Facebook Group:

  • Custom, Hand Made CTX 3030 Lower Rods? Yes Please!

    We'd like to announce a brand new vendor for BBH, Steve's Detector Rods!

    Steve's Detector rods are made of the highest quality materials, right here in the USA, in his shop in Norman, OK. What sets these CTX 3030 rods apart is the price and build quality. These rods have exceptional hand-assembled levels of detail and quality, they are made from carbon fiber tubes with engineering grade plastics to sustain the test of time.

    We're excited to add this product to our store and stand behind these rods 100%. Check them out now! Steves CTX Custom Hand Built Lower Rod

  • The Many Life Benefits of Metal Detecting!

    Metal detecting has always been a great form of exercise, walking the fields and parks, swinging a sometimes 20lb machine around hunting for treasure, but there are many other great benefits besides exercise that come with metal detecting:

    - Great social experiences. most people love to approach metal detectorists when they are in public places like parks and beaches. the hobby can sometimes look strange yet exciting at the same time to onlookers who may be curious about the hobby or if you've had any success on the day, metal detecting is always a great way to meet new people!

    - Good family bonding activity! having family members interested in metal detecting? bring them along! kids especially love the thrill of the hunt. Sposes should be encourage to give it a try at least once too, you never know, you could get them hooked too and have a full time partner for your hunts!

    - Financial benefits saving all that clad really pays off. most new detectorists can fully pay off their detector purchase within the first couple of years with clad alone if your good about keeping it! those quarters and dimes really do add up! then take into account the rare finds, like jewelry and older coins and you could be onto a real financial winner, far outweighing the initial cost of your equipment!

    What are you waiting for? call us or jump on live chat any time and find a great deal on your next metal detector, we're always just a call or click away and would love to see you out in the field!

  • Mothers Day and Metal Detecting?

    Mothers Day and metal detecting are two things that usually are not in common. Most of the time we associated Mothers day with spending time with mom at home. Sometimes that can mean cooking breakfast for her in bed, Taking her for to a nice restaurant that she likes or simply showing up with a card and a hug.

    Many of us however are lucky enough for out Wife or Mom that likes to detect as much as we do or maybe even more. We have customers all the time call us wanting a machine for their wife because she keeps "borrowing" his. ha ha Metal Detecting is a great way to get outside got some exercise and spend time with each other while digging up the loot!

    Happy Mothers Day from Bart at BBH Metal Detectors!

  • In Depth Minelab Equinox 800 Review

    Big Thanks to Silverfiend for this excellent Equinox 800 guestpost!

    When I first read the announcement of the Minelab Equinox detector at the Detectival event in England, I must admit to feeling excited! What they promised was an affordable, multi-frequency, waterproof, lightweight detector which you could change from multi-frequency to a choice of single frequencies. I finally got to open my very own Minelab Equinox 800 detector on the spring equinox of 22 March. Even though I only have a few hours on it, I LOVE what I am seeing.

    Even just taking all the parts out of the box, I could tell this was going to be a feather weight compared to the Minelab CTX3030 I have been using for the last 5 years. The fit and finish of the parts are nice, and if you’ve ever put a metal detector together before you won’t have to look at any instructions to figure it out. For anyone looking to buy one, PAY ATTENTION HERE: This detector does NOT come with a power source. You get a USB charging cable, but you supply your own USB power source. Minelab recommends a 5V 2Amp charger. Charge time is directly based on the power supply. The recommended power supply will take 4 hours to charge the battery from flat to full. My initial charge took almost that long. If you use a lower rated power supply, such as a computer USB plug it will likely require much longer to charge. You can download the full PDF user manual from Minelab’s website to read their recommendations and warnings on charging the detector.

    Ergonomics can be the “make or break” of a detector. Because this detector is so light, most of the weight winds up being in the coil and that can make the whole setup feel “nose heavy” if not adjusted correctly. First, the lower rod can be extended a long way to accommodate someone who is tall. If you aren’t that tall, but still try to hunt that way then you are going to feel the consequences in your arm. Best practice (for this or any detector) is to shorten the shaft so the coil is right in front of your feet. Ergonomically, the closer you can get to your natural stance with your arm hanging loose at your side, the better off you will be. For anyone who wants to put the coil as far out as possible, adding a little weight under or behind the cuff is something to consider and it’s something I might play with to help with balancing. To Minelab’s credit, slots are made into the footrest to make it easy to strap external batteries, counterweights, or both combined.

    One of the most helpful features Minelab has made available on recent detectors is the ability to have wireless headphones so that you are no longer tethered to the detector. This began with the CTX and the WM-10 module. The Equinox comes with a new version of the same technology, called the WM-08, however it also can connect to any Bluetooth Low Latency headphones. The EQX-800 stock wireless phones are what I have been using so far. One thing to keep in mind is that the Equinox uses 1/8 inch (3.5mm) headphone connectors instead of the more common 1/4 inch. If you have an older set of phones that you absolutely love and want to use with this, you will need a 1/4 female to 1/8 male adapter.

    Of course, the first thing everyone wants to know is “how does it perform”. That is always a dangerous and loaded question. It’s difficult to offer a true, honest answer until you have a solid grasp of the functions and language of detector and THAT takes time. What I do feel comfortable saying is that I am VERY happy so far. You can read my first experiences with the Equinox and judge for yourself. Whenever people ask me for advice when starting out with any new detector, I always tell them to start out easy, don't hunt trashy sites. Even better to start in a tot-lot to learn tones, responses, pinpointing, etc. Jumping head-first into a trash filled site is never a good way to start. That is a solid, smart bit of advice aimed to help learning while preventing frustration. Of course, I didn’t follow my own advice. I went straight to a previous hunt site, one that is extremely trashed out. So why did I go there?

    Because this was a place I had already dug a lot of old coins! It’s hard to resist the urge to see what you might have missed with an older detector. Predictably, the non-stop barrage of tones left me feeling like "what the heck have I gotten into? Is this thing any good? Am I even going to like listening to this?" The biggest obstacle to learning language of the EQX is that it is so sensitive and fast that trashy sites will lead to sensory overload. I suggest you learn from my mistake and head my long-standing advice. Start in the “bunny slope” level of sites and work your way up to hunting the expert level grounds.

    Once I got onto a cleaner hunting spot, learning the tones of this new detector became much easier. I began learning to differentiate target sounds and the responses of deeper coins from shallow ones. I finally started digging old wheat-cents and then I dug my first silver dime (a Mercury dime) next to a chunk of iron. This was in a place I have previously hunted with the CTX, the E-Trac and my old partner had hunted with a DEUS. My second day to get out with the Equinox was at an old park where I previously never found anything old. My previous hunts only produced modern clad. So, I’m sure you are again curious “why I would choose this spot”. It was a 100+ year old park, in small town. It would likely have seen countless parties and celebrations with hundreds of people in attendance in its time but is far enough out of site that most detectorist would have missed it. Even though it hadn’t produced for me yet it still had great potential. My first hunt there with the EQX800 gave me a Barber dime (as well as some wheat cents), my first for the year and my first silver from this place. In these first trial runs, I learned quite a bit! At first glance, the depth meter seems completely unreliable. As you gain experience you see it is great if a target is alone. I think the problem people have with it is that it gets confuse in trash (and trash is practically everywhere). The VCO pinpoint really helps give you a great clue on the depth, and I think that this may be the best method overall.

    My third hunt, I took it to a site that has been pounded hard by other detectorists. Its public, its old, its been hunted for decades. I dug 13 silvers from there in one day with my CTX (after which, other local hunters pounded it AGAIN). With the Equinox I pulled more deep, on-edge wheaties. I dug my first Indian Head from this site (and first for the year), I dug 2 Buffalo nickels and then I hit GOLD! A tiny, old, deep, gold pin with a 1929 date inscription. It was a measured 6 inches deep and still gave a solid nickel response. After that, I knew this detector was a game changer for me.

    How would I summarize the first few days of using the Equinox? Simple, “We have a winner!” Everyone wants to compare the Equinox to it’s brother the CTX. I have been using the CTX since it’s release 6 years ago. So far I haven’t found anything that the CTX could see which my Equinox couldn’t. HOWEVER, the Equinox is worlds better at hitting low conductors like gold and nickels. I have dug more buffalo and V-nickels in a week with the EQX than I dug all last year with the CTX. The tiny gold I have dug are things the CTX could never find. Every detector has its niche, but the Equinox seems to be a very, very large niche in this hobby. If you are looking for your first detector, or just your next, I wouldn’t hesitate to offer this as a very strong choice to consider.

    Good Luck and Happy Hunting, Silverfiend

  • What is the difference in the Minelab Equinox 800 and the Minelab Equinox 600 metal detectors?

    I get asked many times a day what is the difference between the Minelab Equinox 600 and the Minelab Equinox 800. Many people just want a good all around metal detector that is great on the pocket book but competes with the big dogs.  A lot to ask but the Minelab Equinox delivers with its different models and lineup.

    The EQUINOX 600 is limited to 5 kHz, 10 kHz, and 15 kHz single frequencies and leaves out the super cool wireless headphone option. Although you can add the Minelab Equinox wireless headphones set separately that will be available this summer.  They both still work the same way and have no noticeable difference in the way they detect or depth.  Great price and options for a good light metal detector.

    The most in your face and obvious option is the wireless headphones the Equinox 800 provides. It it a very good all around detector. It has Wireless headphones with help from the minelab WM-08 wireless audio module and 2 more frequencies, a total of 5 frequencies, 5 kHz, 10 kHz, 15 kHz, 20kHz and 40kHz.  Great for gold nugget hunting and relics with those added higher frequencies! If gold nuggets are not your thing save the $ and get the 600. Of course you lose wireless headphones as well.

    The 600 has 3 ranges for detector swing speed while the 800 had 8. Faster swing speed does loose a bit of detection depth but seperation is GREATLY increased. The stock setting is perfect balance of speed and depth. The added 8 settings of the 800 give great advantage to fine tune your machine.  Slow swing speeds give amazing depth! The lower you can use the better you will be off for more depth.

    The 600 iron range is also different from the 800. The 600 has four settings. Fifty tone, 5 tone, 2 tone and single tone. The 800 allows the user to shift non ferrous targets tones and the volume which can help when your a tone only hunter to hear slight differences in metal detector targets.

    Both of the machines offer Minelab's Multi-IQ simultaneous multifrequency technology and operate the same way as was said before. Both operate on multiple frequencies at the same time. and give the same target evaluation as the other when in multifrequency. Not so in single frequency operation. Not many machines can say that! Huge advantage for areas with high mineralization, bad ground, iron infestations or high trash. Salt water beaches included!

    The advanced settings the 800 provides over the 600 is quite an advantage as well! 800 on the left and 600 on the right in picture below. You can adjust automatic noise cancel with the 800 giving some advanced users the option to battle cross talk with other metal detectors and power lines causing EMI.

    Equinox Advanced settings Minelab Equinox Advanced settings Options. 800 on left, 600 on right.

    Now which one do you want? That is up to you and what options are important to you. Both are great metal detectors! If you have any questions feel free to email us at or call us at 405-206-9010.  Be glad to help you any way we can!

    Here is an updated comparison chart with all of the differences between the Minelab Equinox 600 and 800!


    Specifications Equinox 600 Equinox 800
    Detect Modes: 3 (Park, Beach, Field) 4 (Park, Beach, Field, Gold)
    Operating Frequencies (kHz): Multi, 5, 10, 15 Multi, 5, 10, 15, 20, 40
    Noise Cancel: Auto Auto; Manual (-9 to 9)
    Ground Balance: Auto, Manual Auto, Manual
    Sensitivity: 1–25 1–25
    Target Volume: 0–25 0–25
    Threshold Level: 0–25 0–25
    Target Identification: 50 segment notch discrimination,

    Ferrous: -9 – 0, Non-ferrous: 1 – 40

    50 segment notch discrimination,

    Ferrous: -9 – 0, Non-ferrous: 1 – 40

    Threshold Pitch: Fixed 0–25
    Target Tones: 1, 2, 5, 50 1, 2, 5, 50
    Tone Break: Ferrous Ferrous
    Tone Pitch: Ferrous Ferrous
    Tone Volume: Ferrous Ferrous
    Depth Indicator: 5 levels 5 levels
    Length: 1440 mm (56.7″) 1440 mm (56.7″)
    Weight: 1.34 kg (2.96 lbs) 1.34 kg (2.96 lbs)
    Standard Coil: 11-inch Double-D Smart coil with skidplate (waterproof to 3m/10′) 11-inch Double-D Smart coil with skidplate (waterproof to 3m/10′)
    Audio Output: • In-built loudspeaker
    • 3.5mm (1/8″) headphones (included)
    • Bluetooth compatible
    • WM 08 Wi-Stream compatible
    • In-built loudspeaker
    • 3.5mm (1/8″) headphones (included)
    • Bluetooth compatible
    • WM 08 Wi-Stream compatible
    Headphones (included): Wired 3.5mm (1/8″) headphones (non waterproof) Bluetooth and aptX™ Low Latency headphones (non waterproof)
    WM 08 (included): No Yes
    Display: Monochrome LCD with backlight Monochrome LCD with backlight
    LCD Backlight: On, Off Low, Medium, High, Off
    Battery: In-built rechargeable Lithium-ion battery In-built rechargeable Lithium-ion battery
    Battery Runtime: Approx. 12 hours Approx. 12 hours
    Waterproof: Waterproof to 3m/10-feet Waterproof to 3m/10-feet
    Key Technologies: Multi-IQ, 3F×3, Wi-Stream, Bluetooth, aptX™ Low Latency Multi-IQ, 5F×8, Wi-Stream, Bluetooth, aptX™ Low Latency
    Other Accessories: USB Charging cable (1.5A), Multi Language Screen protectors USB Charging cable (1.5A), Multi Language Screen protectors
    Software Upgradeable: Yes, via USB connection (Windows and OSX) Yes, via USB connection (Windows and OSX)
    Warranty: 3 years control box and coil 3 years control box and coil
  • Take the kids metal detecting with you!

    As parents, often times it's difficult to find new and exciting things to do with our kids in this technology age. One of the best things we've heard from our customers is that their kids absolutely love to go out and metal detect with their parents!

    Metal detecting is great for the younger generation, you can use it as a tool to teach history, create excitement hunting for treasure, and get some great physical exercise all while spending quality time with your children.

    While younger children may not be able to handle full size metal detectors, letting them help with a pinpointer or hand digging tool is a great way to include them in your hobby and let them share the excitement of your finds. we also offer a great selection of cheaper detectors that are really light weight and easy to use for children around 11 and up. The Garrett Ace series would be a fantastic starting point for early teenagers who show a strong interest in metal detecting.

    Here's to the next generation of history lovers, treasure hunters and metal detectorists! As always please contact us at any time if you have any questions regarding the products we sell and service we offer. Happy hunting to you and yours from everyone at BBH


    First shipment of the MAKRO MULTI KRUZER WATERPROOF METAL DETECTOR came in today! These things are DEEP! Be sure to ask about special deals!

  • Don't forget this years Charles Garrett Memorial Hunt!

    It's almost that time of year again, the annual Charles Garrett Memorial Hunt for 2018 will be a fun filled day out for the whole family. Be quick, there are limited spaces still available and this even usually sells out pretty fast!

    The event will be in Jefferson, Texas and will be a great weekend of detecting activities, plus a lot of fun things to do with the family, including rides on the Jefferson railway, a free kids hunt for ages 12 and under, cannon firing demonstrations, special guests and much more!

    Head over to the Garrett Website for more information and have a fantastic time!

1 ... 3 4 5 6 7 11